|
D3 Library and SDK
At the heart of the
flexibility of C_wiz is the D3 (data device driver)
architecture.
What is a D3
Current D3 Library
All D3s listed below are
included with the Evaluation Edition
Download.
As D3s are not
particularly hard to write, our intention is to provide
any D3s developed in the future by ForTotalRecall free
of charge. This statement of intent obviously can not
cover any D3s written by third parties.
All D3s have inbuilt
diagnostics tools, a 60 second trace capability and
fully utilize the C_wiz Test Drive facility to provide
context sensitive online documentation.
Contact Us
if you think we don't have your requirement covered.
AIS
Caterpillar M5X
Clock
COM
On-Off
COM Patch Panel
CruzPro All-In-One
Depth (NMEA
0183 DPT)
Frame
Grabber (LTMM)
Frame Grabber (S2255)
GPS (NMEA
0183 RMC)
ICP
DAS 7000(II)
Rudder (NMEA
0183 RSA)
SAE
J1587
The SAE J1587 D3 supplies
data to C_wiz from one or more SAE J1587 transmitters on
an SAE J1708 network.
An SAE J1587 transmitter
is a microprocessor based module that takes some form of
(typically analog) data and communicates the
characteristics (values, status etc) of this data over
an SAE J1708 network using the SAE J1587 message
standard.
Examples of SAE J1587
transmitters include:
o The VDO EDB /GBI
modules which can accept a frequency (tachometer) input
and several resistive inputs (temperature, pressure
etc).
o The computerized
engine control modules on the Cummins QSM11 engine
range.
SAE J1587 is a standard
developed by the (US) Society of Automotive Engineers.
SAE J1708 is a standard
developed by the (US) Society of Automotive Engineers.
In essence SAE J1708 is a 9600 baud RS485 standard.
The SAE J1587 D3 uses an
SAE J1708 to RS232 converter manufactured by the B & B
Electronics Manufacturing Company of Ottawa, Illinois,
USA.
System Monitor
VDO
Logic Combi
D3 Plans
D3
Software Development Kit (SDK) |
