|
D3 Library and SDK
At the heart of the
flexibility of C_wiz is the D3 (data device driver)
architecture.
What is a D3
Current D3 Library
All D3s listed below are
included with the Evaluation Edition
Download.
As D3s are not
particularly hard to write, our intention is to provide
any D3s developed in the future by ForTotalRecall free
of charge. This statement of intent obviously can not
cover any D3s written by third parties.
All D3s have inbuilt
diagnostics tools, a 60 second trace capability and
fully utilize the C_wiz Test Drive facility to provide
context sensitive online documentation.
Contact Us
if you think we don't have your requirement covered.
AIS
Caterpillar M5X
Clock
COM
On-Off
COM Patch Panel
The COM Patch Panel D3
allows data to be sent between real COM ports and /or
virtual COM ports.
There are no constraints
on the way this D3 can be used, but typically it is used
to route COM port data on a "one to many" basis, for
example to send GPS data coming in on the PCs real COM
port COM1 to:
o
Virtual COM port COM21, connected to the GPS (NMEA 0183
RMC) D3 which uses the GPS data to supply latitude etc
to C_wiz.
o
Virtual COM port COM22, connected to the AIS D3 which
uses the GPS data to filter AIS data received on a
separate real COM port before sending it to C_wiz.
o
Virtual COM port COM6, connected to a chart plotter
unrelated to C_wiz, which uses the data as if it was
coming from a real COM port.
CruzPro All-In-One
Depth (NMEA
0183 DPT)
Frame
Grabber (LTMM)
Frame Grabber (S2255)
GPS (NMEA
0183 RMC)
ICP
DAS 7000(II)
Rudder (NMEA
0183 RSA)
SAE
J1587
System Monitor
VDO
Logic Combi
D3 Plans
D3
Software Development Kit (SDK) |
